Swimming Pool Deck Repair Products

When Pool Decks Need Repairs: 

Pool and spa deck repairs are often necessary because exposure to direct sunlight and varying temperature cycles make the deck expand and contract, causing damage. Additionally, an aged pool deck often suffers from cracking because of significant settling over time.

As a result, necessary repairs can range from fixing small cracks in the deck’s surface to sealing off coping from the bond beam trim. By appropriately identifying what is causing the cracks — rather than just filling them in — you’ll ensure that the repair will be long-lasting and won’t just be a band-aid fix.

Pool Deck Repair Questions to Ask:

  • Is the pool deck serving a structural purpose?
  • Is the pool coping cracking?
  • Was the decking improperly installed, which may be resulting in drainage issues?
  • Are pool tiles popping off?
  • How large and deep are the cracks?

Once the problems and their severity are identified, selecting the most appropriate pool deck repair product for the job is the next step. AquaBond offers professional deck repair products to fix a wide variety of pool deck problems. If you're not sure which one is the best choice for your particular situation, give us a call at 714-961-1420 Ext 1. We'll be happy to provide some technical advice.

AquaBond Swimming Pool Deck Repair Products: 

AquaFlex Underwater Sealant On an in-ground pool, the coping was improperly installed over a weak bond beam which has resulted in cracking. Without having to undergo a costly pool deck repair, this product can be used in wet conditions to re-bond the coping. And is flexible enough to accommodate deck shifts and movement without compromising the integrity of the bond.

Structural Repair Adhesive Due to stresses put on the bond beam, long horizontal cracks are occurring on the pool floor, and tiles are popping off along the inside of the pool trim. This high-strength, two-part acrylic adhesive provides superior adhesion and sets up in just 5 minutes.

Concrete Repair Epoxies Use our self-leveling or non-sag concrete repair compounds to repair spalled or cracked concrete pool decks, cantilever decks or pavers – even in high-traffic areas. These products provide a clean, durable finish, are sandable and paintable, and harden in 30 minutes.

Have technical questions?
Give us a call at 714-961-1420 Ext 1

Waterproof Permanent Gap and Seam Fillers Can be used anywhere you would use silicone caulk, but with the added advantage of permanent flexibility! UV stabilized and non-sag, they stay put on vertical, horizontal or sloping surfaces, skin over in five minutes and fill up to a 1/2" gap.

AquaStitch Stress Proof Stitch is our heavy-duty, 12" L-Shaped staple that mounts into two holes in the concrete deck. One end is anchored with a 3/8" x 2 3/4" expanding anchor and the other is anchored by our AE-2200-250 Anchoring Epoxy. The entire stitch is embedded in the epoxy, as well. Custom engineered from a robust, Stress Proof® steel product, these incredibly strong staples are 3-times stronger than #3 rebar!

S-Stitch is the newest and most versatile addition to our family of concrete deck crack repair staple/stitch products. Strong but lightweight, and only 1/4" diameter, S-Stitches can be installed in a much shallower channel – as shallow as 1/2" and only 3/8" wide.  This Patent Pending system allows for lay-flat installations, criss-crossing (for super-strength repairs), and also more typical stitch installations using our cleverly engineered Adapter Plates and Bridges. Unlike other stitch/staple systems S-Stitch is perfect for repairing inside and outside corners of any radius.

Successful pool deck repair depends upon the quality of the products used. We guarantee that when you use AquaBond products, the quality will exceed your expectations.

StressProof® is a registered trademark of Niagara LaSalle Corporation