New S-Stitch Concrete Crack Repair System For Pools & Decks

Versatile S-Stitch Concrete Crack Repair Staples by AquaBond for Pools

Inexpensive, super strong, requires far less chipping and drilling and installs in shallower channels than any other pool crack repair staples on the market!

Four simple components make AquaBond's S-Stitch the most versatile concrete pool crack repair system on the market

No Concrete Repair Stitch System Is More Versatile Than S-Stitch!

AquaBond's new, patent-pending S-Stitch Concrete Crack and Fracture Repair System for swimming pools and decks is far more versatile and faster to install than other concrete repair staple or stitch systems.  You'll save tons of time by grinding shallower and narrower channels than old-style steel staples require - and shallower invasion reduces microcracking. You can even double up, or criss-cross S-Stitches for amazing resistance to future movement!

S-Stitch staples are embedded into cracked concrete and encapsulated in anchoring epoxy. Spanning the crack or fracture, a series of them, installed per instructions, restores and even improves, the strength of the concrete.

  • Revolutionary new S-shaped stitch system keyed into concrete
  • Lay-Flat "S" design can be installed in a very shallow channel - less invasive
  • Install as a hook or in lay-flat position - even criss-cross for incredible concrete stability
  • Deeper grinding and drilling only required where anchors are located
  • AquaBond AE-2200-250 High Strength Anchoring Epoxy secures components permanently into the concrete
  • Can be installed with or without anchors. (anchors should be used when concrete is over 5" thick)
  • Incredibly strong, 1144 Stress Proof® cold rolled steel stitches (see specifications)
  • S-Stitch's components have a proprietary anti-corrosion coating, encased in anchoring epoxy when installed per instructions
  • Repairs vertical, horizontal, diagonal and inner or outer curves/corners, steps, love seats, etc.
  • Larger length and diameter S-Stitches available
  • Repairs structural cracks in any concrete surface
  • More versatile than any other system
  • Double modulus by stacking
  • Guaranteed 5-years against manufacturer defects
  • Patent Pending

AquaBond's S-Stitch Concrete Pool Crack Repair Staples & optional components can be combined in many ways

SSK-12-05,  12" S-Stitch Kit for Five-Foot Crack

Five 12" S-Stitches
One 250ml cartridge of AE-2200-250 Anchoring Epoxy
One static mixer.

SSK-12-10,  12" S-Stitch Kit for Ten-Foot Crack

Ten 12" S-Stitches
Two 250ml cartridges of AE-2200-250 Anchoring Epoxy
Two static mixers.

SSKC-06-10,  6" S-Stitch Corner Repair Kit for Five-Foot Crack

Ten 6" S-Stitches
Ten Adapter Plates
Ten Expanding Anchors
Five Bridges
Two 250ml cartridges of AE-2200-250 Anchoring Epoxy
Two Static Mixers.

SSKC-12-10,  12" S-Stitch Corner Repair Kit for Five-Foot Crack

Ten 12" S-Stitches
Twenty Adapter Plates

Twenty Expanding Anchors
Five Bridges
Two 250ml cartridges of AE-2200-250 Anchoring Epoxy
Two 2 Static Mixers.

SSP-0625 Single 6" S-Stitch

AquaBond SSP-0625 Single 6

SSP-1225 Single 12" S-Stitch
AquaBond SSP-1225 Single 12

SSP-1825 Single 18" S-Stitch


SSP-2425 Single 24" S-Stitch

SAP-25  S-Stitch Adapter Plate

SBA-25  S-Stitch Bridge Adapter

SAA-25 S-Stitch Adapter Plate with Anchor

Includes One SAP-25 S-Stitch Adapter Plate and One SA-58 Expanding Anchor

SA-58 Expanding Anchor

Recommended Companion Products:

DMK-377 Polyurethane Foam Injection kitThe AquaBond DMK-377 Polyurethane Foam Injection kit is the perfect companion to the S-Stitch system. The white, waterproof foam expands to 25-times its volume. It will permanently fill cracks all the way through and create a long-lasting, watertight seal in concrete walls, foundations, pool & fountain walls and other barriers. When you use the DMK-377 foam injection kit along with S-Stitch, you have performed the ULTIMATE in concrete crack repair! Learn more here.

AE-2200-250 Non-Sag Anchoring Epoxy
250 ml Cartridge with Static Mixer

Super strong, structural-quality epoxy in a 250 ml U-Tah cartridge that can be dispensed from our DM-250 manual dispensing gun or any heavy duty, standard sized caulking gun.

Includes one AE-2200-250 cartridge and
one static mixer

DMK-2200-250 Anchoring Starter Kit, 250 ml 

This Kit Includes:

One DM-250 dispensing gun
One 250ml cartridge of AE-2200-250
One static mixer

250ml Manual Dispenser Gun 

Our powerful DM-250 manual dispensing gun has a high-thrust 26:1 ratio drive. Use with our new 250 ml, U-Tah adhesive cartridges. Also dispenses standard-sized caulk-style cartridges.

Have technical questions?
Give us a call at 714-961-1420 Ext 1

StressProof® is a registered trademark of Niagara Lasalle Corporation.